Top Brands | Big Discounts | Nationwide Delivery & Installation
01691 670394

Steelroll Galvanized Shutter

Supplying Garage Doors Since 1989 - You're In Safe Hands
< Back

  • Steelroll Galvanized Shutter
  • Solid, Vision and Perforated Slats available
  • Tall Industrial Doors with Solid Slats
  • Shutter with Solid Slats and Vision Slat section
  • Close Up of Vision Slat
  • Vision Slat Shutter Installed
  • Close Up of Perforated Slat

Click on the thumbnails for larger view

Site inspection

Nationwide fitting

Supply only
(full instructions)

30 years'

Choose your size for a price

1.Select a county for shipping*


Order Status

Price Subtotal

PRICE ON APPLICATION. Please contact us for accurate prices. Use our self survey form or ring us on 01691 670394

Steelroll Galvanized Shutter description and specification.

British made Steelroll Commercial Galvanized roller shutters are made to measure to suit your sizes.
Individual 76mm, 22 gauge roll formed lath, galvanized.
Powder coating of the galvanized lath is available in any RAL or BS colour to suit your specification.
Full powder coated box enclosure to house the roll ensures neat appearance and quieter operation of this high quality galvanized roller shutter. For guide heights upto 2200mm, box size is 305mm square.For guide heights upto 3650mm, box size is 360mm square.
Key switch operation, remote control with hand transmitters available at extra cost.
“L” or “T” section heavy duty bottom slat for maximum security.
90mm guide channel each side in heavy duty extruded aluminium with built in draught seals ensures quiet operation, draught reduction and easy installation. No protrusions beyond 90mm guide each side make measuring and installation easy.
Single-phase tubular motor. Three phase motors available for high usage doors and larger doors over approximately 4m wide by 3m high.
CE marked safety brake installed to ensure the roller shutter is fully compliant with European and British legislation, it is safe and secure.
For shutters larger than sizes shown and special application roller shutters please enquire.

Please see below the options available on our Commercial Steel Roller Shutters, to get a quotation please enquire.

  • 20swg lath or 18swg lath for greater strength and security
  • Perforated lath and punched lath for ventilation on car parks or vision on shop front shutters etc.
  • Fire rated shutters and Secure By Design (level 1, 2, 3 and 4) available.
  • Installation service of all our galvanized and commercial shutters available. Please send us your sizes and forward us the job details for unbiased advice and an itemised quotation.
  • Shutters available upto 6500mm wide x 6000mm high

Size help and measuring up guide for your made to measure Galvanised Roller Shutter.

  • The tubular motor fitted within the main shaft and does not protrude beyond the end of the box enclosure and beyond the outer edge of the guides.
  • The overall width of the shutter is the opening width plus both guides.
  • This shutter is ideal for installation between brickwork or between steel stanchions.

Ordering sizes are:

WIDTH – opening width between guides
HEIGHT – opening height from floor to underside of box enclosure (guide height).

Box size:

For guide heights upto 2200mm, box size is 305mm square.
For guide heights upto 3650mm, box size is 360mm square.

Guide sizes:

Guides are 90mm wide as standard, and 70mm wide for smaller shutters and limited side room applications.
Guides can also be made 150mm wide for higher security, high wind resistance and large doors.

Please send us your sizes and ideally some digital photos of the opening(s) and we will help, advise and quote accurately.