Hormann M-Ribbed Woodgrain LPU42 Insulated Sectional Garage Door

From £974.00

Our advice on measuring for Hormann M-Ribbed Woodgrain LPU42 Insulated Sectional Door

• Sectional garage doors are almost always installed onto the rear surface of the brickwork aperture.
• They can also be fitted between brickwork and underneath the lintel of the garage opening.

The stated door sizes do not include the frame.

• Hormann and Garador sectional garage doors are almost always installed onto the rear surface of the brickwork aperture.
• They can also be fitted between brickwork and underneath the lintel of the garage opening. Please see both options explained below.
• Minimum side room of 90 mm each side of the opening for the frame uprights, dimensions 3 and 4 in the diagram, view from inside.
• The stated door width and height does NOT include the frame. The stated door size is the INTERNAL frame size.

Measure and send us these sizes for a quote.

Fitting sectional door onto the rear of the brick opening.

• As a general rule the brick work opening should be the same width (dimension 1) and height (dimension 2) as the door ordered.
• You will require a flat surface to fit the frame onto with side clearance (dimensions 3 and 4) and headroom (dimension 5) to accommodate the frame.
• These clearances must extend uninterrupted down the garage for ordering height plus 510mm as the tracks go into the garage this distance.
• You can show some of the fixing frame within the opening in order to avoid buying a made to measure door if you wish.

• It is normal to show upto 50 mm each side and upto 75 mm at the top.
• For little extra cost Hormann will factory width or height cut a standard door to the sizes you require. Made to measure doors also available.

In the centre only (where the motor fits) you will need additional clear depth into the garage:

• 3200mm for doors upto 2125mm high on Z and L gear
• 3450mm for doors upto 2375mm high on Z and L gear
• on taller doors, please phone us on 01691 670394 to discuss

Fitting a sectional garage door between brickwork and underneath the lintel.

• The stated door width is the distance between the steel frame uprights and the height from the floor to the underside of the frame crossbar. It does not include the frame leg each side and the frame crossbar at the top.
• For example: a 10 ft (3048 mm) x 7 ft (2125 mm) Hormann sectional door fitted between brick and under the lintel will require:a brickwork width of 3048 mm door width + 90 mm frame on left + 90 mm frame on right  plus 10 mm fitting clearance = 3238 mm required brickwork opening width.
• The opening can be a little wider. The gap can be trimmed with a manufacturer’s trim kit or UPVC.
• The finished floor to lintel height will need to be at least 2125 mm door height + 95 mm cross bar depth + 10 mm fitting tolerance = 2230 mm required brickwork opening height.
• The height can be a little more. The gap can be trimmed with a manufacturer’s trim kit or UPVC.
• Between brick installations also require a manufacturer’s Between Brick Fitting Kit.

Sectional door fitted between the brick pillars.

Hormann’s published sectional doors technical information.

Please see below:

• Technical specification of single sectional door upto 10ft wide.
• Technical specification of sectional doors over 10ft wide.
• Technical specification of sectional doors over 10ft wide on L gear (Low headroom < 210mm headroom).
• Full explanation of abbreviations for all diagrams at the bottom of this page.

Hormann technical specification for a single sectional door UPTO 10ft wide. See explanation of diagram abbreviations at the bottom of page.

Track application Z


Horizontal view. Track application for sectional doors on Z, N, L or H gear.



Vertical view (with operator). Track application Z for sectional doors under 10ft wide on Z gear.

Hormann technical specification for a sectional door OVER 10ft wide. See explanation of diagram abbreviations at the bottom of page.

Track application N. 


Horizontal view. Track application for sectional doors on Z, N, L or H gear.


Vertical view (with operator). Track application N for sectional doors over 10ft wide on N gear.

Hormann technical specification for sectional doors OVER 10ft wide on L gear. Low headroom less than 210mm.

Track application L.


Horizontal view. Track application for sectional doors on Z, N, L or H gear.


Vertical view (with operator). Track application L for sectional doors over 10ft wide on L gear.

Explanation of abbreviations for all Hormann diagrams.

Garage door supply only for DIY installation by the customer:

• Please click here to see PDF instructions of fitting a Hormann single skin sectional garage door on a Z Spring.
• Please click here to see PDF instructions of fitting a Hormann single skin sectional garage door to a N Spring.
• Please click here to see PDF instructions of fitting a Hormann single skin sectional garage door to a L Spring.

Garage door supply and installation service by our qualified fitters:

• We offer a national garage door installation service on this product to both trade and retail customers.
• We have a number of expert garage door installers working all over the country from Cornwall to Aberdeen and pretty much everywhere in between.

For more information on our garage door supply and install service, areas covered and fitters profiles please click here.

In these two videos we explain the mechanism, and the safety features of a sectional garage door and show how it works.
First video is showing a single width sectional garage door on a tension spring assembly - Z gear. Second video is showing a double sectional garage door with front mounted torsion springs - N gear.

Hormann Z spring sectional doors

Video showing Hormann single sectional door on Z gear.

Hormann N spring sectional doors

Video showing Hormann double sectional door on N gear.

Hormann UK Ltd. warranty Sectional Garage Door: Series 2000

Warranty Period

·       The purchaser is granted a warranty covering the safe and reliable function of the Hormann garage door for a period of 10 years from the date of purchase.

·       The warranty period for replacement parts is 6 months, however, at least the current warranty period.

·       The purchaser is given a 5-year guarantee from the date of purchase on the springs, wire cables, track rollers, hinges and guide rollers of garage doors in normal use, whereby normal use constitutes no more than 5 door operations (open/close) per day.

Hormann products are manufactured to the highest quality standards and leave the factory only after rigorous quality testing.

Should you nevertheless have grounds for complaint, please contact your supplier Arridge Garage Doors Ltd so they can forward your claim to Hormann.

How to claim?

To enable your claim under Hormann warranty to be processed as quickly as possible, please provide the following details:

·      Your name, address and telephone number

·      Original invoice with date of purchase

·      Product description/door type and product number

·      Description of defect

Hormann will then assess your claim. This may require Hormann to inspect the product in-situ. In the event that there is no legitimate warranty claim under the Hormann terms, you may be liable for the costs of the inspection visit. We strongly recommend that you take note of the care and usage instructions displayed on the stickers on the back of your garage door, and that you follow these instructions throughout*.

Warranty Conditions

During the warranty period Hormann undertake to rectify any and all defects to the Hormann product which can be proved to be attributed to a material or manufacturing fault. Hormann pledge at their discretion to either exchange the defective merchandise for faultless merchandise, repair it or allow a reduction in price.

Hormann do not accept costs for dismantling and installation nor for carriage.

Replaced parts become Hormann’s property.

The warranty does not cover damage caused through:

• improper installation and negligent care and maintenance
• improper initial and subsequent operation
• negligent or wanton destruction
• external influences such as fire, water, salts, alkaline solutions, acids, abnormal environmental influences
• mechanical damage through improper transport and fitting
• priming and other surface protection treatments
• incorrect or too late applied surface protection treatments
• repair by non-qualified persons
• using non-Hormann parts without the approval of the manufacturer
• removal of the product number or making it unidentifiable

 

User Information and Care? for Hormann Sectional Steel Doors?

 

·      The coating process applied to the door and chassis is environmentally friendly.

·      Minor scratches or marks are not covered under the conditions of Hormann warranty and should be repaired immediately to prevent corrosion and deterioration of the panel.

·       Corrosive substances such as acids, alkaline, and salts, etc. should be cleaned from the door immediately; failure to do so will result in deterioration of the finish, which will not be covered under Hormann warranty.

·      Should deterioration of the finish start to occur you will need to repaint your door immediately. Prepare the surface lightly with wet and dry. Then treat with solvent based 2 pack epoxy wash primer and a normal commercial paint (cellulose paint must not be used).

·      Hormann sectional steel doors are a finished product. They do not require re-painting on site. They are however not immune to damage, which can occur at any stage of the handling of the product from factory to site.

·      Minor surface damage can easily be repaired using touch up sprays or sticks without invalidating warranties.

Please see Hormann warranty and Declaration of Conformity on their steel sectional garage doors.

 

 

Please see lead times on selected door below...
 
Please click to read important delivery information prior to ordering. 
 
Estimated lead time on Hormann insulated steel sectional garage doors
 

• 2-3 weeks on standard sizes and colours, stock panels only (subject to manufacturers’ stock levels)
• 4-6 weeks for special colours and special sizes 
• 6-8 weeks for non standard and European sizes

 

• At the point of delivery an able-bodied male must be present to assist the driver in offloading the door.

 

• Every effort is made to deliver goods by the estimated delivery dates given. Due to constantly changing stock levels at the manufacturers, production processes and delivery logistics any delivery or installation dates given are approximate only and the Company accepts no liability for any such delay. We endeavor to deliver all our garage doors and products as fast and efficient as possible. Most of our doors are not off the shelf they are made to order.